1. <tbody id="d55mv"><center id="d55mv"></center></tbody><dd id="d55mv"></dd>

      <dd id="d55mv"><big id="d55mv"><video id="d55mv"></video></big></dd>

        1. <th id="d55mv"></th>
          <button id="d55mv"></button>

          swing check valve

          H44X/T-10/16/25 cast iron flanged swing check valve. DN50-DN1000MM with the best quality.

          1.Swing s are best suited for moderate velocity applications. Correct sizing of swing check valves is important. Either too low a line velocity or too high a velocity can damage valve internals and shorten valve life.

          2.Service in systems involving rapid and frequent flow reversals, pulsation or excessively turbulent flow should be avoided. Locating swing check valves away from elbows, equipment, etc., within the piping system can often minimize or eliminate problems caused by this type of application. Suspected problem systems should be reviewed with Pacific Valves before selecting and purchasing swing check valves.

          3.Swing check valves are normally designed for installation in horizontal pipe runs. When disc stops are designed to hold the disc slightly into the flow stream, the valves may also be used in vertical pipe runs (with flow up only). When valves are to be used in vertical pipe runs, this should be clearly specified.

          4.Generally, outside lever and weights are not effective in preventing slamming of swing check valves in sizes above 6".

          5.Threaded seat rings in valves in services with high velocity (turbulent) flow or thermal cycling should be lock welded to the body to avoid loosening. Please specify. 

          版權所有:鐵嶺閥門(集團)工貿有限公司  廠址:遼寧省鐵嶺市銀州區廣裕街118號  進出口部:鐵嶺市銀州區全球通大廈1406室
          電話:+86-024-72826177 72216500  傳真:+86-024-72816177  手機:13904906500  郵編:112000  E-mail:ty6500@163.com
          網址:www.www.museedubucheronlespiles.com  遼ICP備11017782  網站制作:大友科技
          在线 亚洲 视频 小说